FM-1 Field Guide β€Ί How to Update the M-VAVE FM-1 to Firmware V16 (and Fix Error -5)
⬆
Firmware help

How to update the FM-1 to official firmware V16

Get your FM-1 onto M-VAVE's official V16 firmware, whether you're on stock V13–V15 or coming back from custom firmware like SLOOP or Clipper.

What you need

  • M-UPGRADE, M-VAVE's updater, and the FM-1 V16 file (FM-1.fwsc), both from m-vave.com/download.
  • A Windows PC or Mac. M-UPGRADE talks to the FM-1 in a way that doesn't work under Wine/Bottles on Linux. Linux users: see the Linux section below.
  • A good USB cable plugged straight into the computer (no hub), and every other music app closed.

Updating from stock firmware (V13, V14, V15)

  1. Back up anything you've made. A firmware update can reset patterns and settings.
  2. Plug in the FM-1 and open M-UPGRADE. It should show FM-1 Β· Connected and your current firmware number (for example 015).
  3. Click Select firmware and choose FM-1.fwsc. It should show Version 016.
  4. Click Start upgrade and don't touch anything. The FM-1 restarts into an update mode (it may show as "Recovery mode"), receives the data, then restarts again.
  5. When it says Upgrade complete. Verified FM-1_016, you're done. The last page of GLO on the FM-1 shows the firmware version.

If M-UPGRADE says "MIDI device changed or disconnected" after you've swapped firmware, close and reopen M-UPGRADE so it forgets the old device, then try again.

Coming back from SLOOP or Clipper: "UPDATE FAILED -5"

Lots of people hit this. If your FM-1 is running SLOOP or Clipper and you try to install V16, the FM-1 screen shows UPDATE FAILED -5 and M-UPGRADE shows error 258 ("timed out waiting for a MIDI device response"). It happens on Windows too, so it isn't your computer. The custom firmware refuses V16 before anything is written, so your FM-1 is safe.

The fix is to go through V15 first:

  1. Get the official V15 file. M-VAVE publishes it in its own GitHub repository: m-vave/fm1_open β†’ FM-1_015.fwsc.
  2. Open the custom firmware's own web installer in Chrome or Edge (for Clipper: Clipper installer) and choose Return to the official firmware. Pick the V15 file. This step works from any computer, Linux included.
  3. When the FM-1 boots stock V15, update to V16 with M-UPGRADE as described above.

Back up your SLOOP or Clipper projects with their editor first. Returning to official firmware won't keep them.

On Linux?

  • V15 via the web installer works in Chrome on Linux.
  • V16 needs M-UPGRADE, which doesn't see the FM-1 under Wine. Use a Windows or Mac computer, or run Windows in a virtual machine (for example virt-manager with KVM) and pass the FM-1's USB connection through to it.
  • In a VM, the FM-1 shows up under several USB IDs during an update: normal mode 4c4a:c755, update loader 4d4a:4155 ("Jieli Technology"), and Felucca-based custom firmware 1209:0001. Make sure the VM grabs all of them automatically, or the update times out with "No matching OTA-MIDI or HID Loader was found".

What's new in V16?

Eight Voices you can layer or split, 20-note polyphony, a 64-step sequencer with an 8Γ—8 arrangement grid, 128 shared effect setups, new CC numbers and more. The layering lesson and the sequencer lesson walk through the big ones.

Share this lesson Reddit Facebook
Stuck, or found a better way?Ask the community. Every question gets an answer, usually within a day.
πŸ’¬ Ask a question
← PreviousTurn the M-VAVE FM-1 into an 808 Drum Machine (V16 Beat Tutorial)Next β†’M-VAVE FM-1 Factory Reset

All FM-1 lessons