Your FM-1 is a toy. Let's play.

Seven quick levels, each one ending with a sound you made yourself, plus a boss level where you build a moody goth-dub track one part at a time. Tick boxes as you go. Nobody's grading you.

๐Ÿฅ Try the Beat Box

New here? โ˜… Start here ยท 5 things to do first on V16

Firmware 016~5 min a levelHeadphones on
Rank: Knob Curious0 / 0 steps

Made by players, for players

This guide grows from your questions and discoveries. Every message is read by a real person, every question gets an answer right here on the page, and the best tips get your name on them.

Question of the weekWhich song should become the next boss level?
Gear up your FM-1Headphones, cables, cases and sound packs picked for FM-1 owners.๐Ÿ›’ Open the Store
๐ŸŽงStudio headphonesWired, so there's no Bluetooth lag. FM sounds come alive.See on Amazon โ†’ ๐ŸงณHard carry caseKeeps the knobs safe in your bag.See on Amazon โ†’ ๐ŸŽตSound packs ยท $5Crypt Dub Kit and FM-808 Drum Kit. 32 sounds each, instant download.See the packs โ†’

Pick a level

Tap any card to jump in. Tap any button name like FX anywhere on the page to see what it does.
Popular: ๐Ÿ›’ FM-1 Store ยท ๐Ÿฅ FM-1 Beat Box (drum machine) ยท 808 drum lesson ยท Update to V16 / fix error -5 ยท Factory reset ยท Sequencer tutorial ยท FL Studio MIDI setup ยท What's new in V16 ยท MIDI CC chart
0
Warm-up

How this thing thinks

Learn the five habits that make every screen make sense.

Buttons open roomsPress FX, ENV, LFOโ€ฆ to walk in. Press it again to walk out.
HOME = panic exitLost? Tap HOME. (A long press toggles Bluetooth, so just tap.)
SELECT turns pagesMost rooms have more than one page. Bottom of the screen says 1/2, 2/2โ€ฆ
Read the bottom barThe four knobs K1โ€“K4 change jobs on every page. The bar tells you what they do right now.
Save or lose itEdits are temporary until you press SAVE. Level 7 covers it.
Stuck, or found a better way?
Warm-up done. You know more than most people who own one.

Open this lesson as its own page (handy for sharing or bookmarking)

1
Level 1

Surf the sounds

Find three sounds you like and play them in different ranges.

You'll use:

Write down the numbers of your three favorite presets. You'll want them for the boss level.

You can find a bass sound, a bright sound and a pad, and get back to normal pitch with both OCT buttons.

Turning ALGORITHM by accident and wondering why the preset sounds different (turn it back or switch presets). Forgetting the octave is shifted: the OCT LED blinks when you're not at 0.

Stuck, or found a better way?
Level 1 cleared. Badge: Preset Surfer.

Open this lesson as its own page (handy for sharing or bookmarking)

2
Level 2

Throw it in a cathedral

Use effects to make a boring preset sound huge.

You'll use:

Effects no longer live inside presets. There are 128 shared FX setups and everything you play goes through the selected one. On the FX screen, ALGORITHM picks which setup. Changing presets keeps your effects.

Reorder the chain: press SEL on Delay, turn SELECT to move it before Reverb, press SEL to drop it. Echoes that then get reverbed sound softer and further away.

Reverb and delay are on, the filter sweep goes from muffled to bright, and switching presets keeps your effects.

Turning knobs without reading the bottom bar (each effect uses K1โ€“K4 differently). Expecting effects to save with a preset: in V16 they save with Globe or ALL. Mix at 100% can make a sound disappear into reverb.

Stuck, or found a better way?
Level 2 cleared. Badge: FX Wizard.

Open this lesson as its own page (handy for sharing or bookmarking)

3
Level 3

Pluck it, pad it, wobble it

Turn one preset into a pluck, a pad and a wobbly lead.

You'll use:

The same preset can sound plucky, pad-like or wobbly, and pressing ENV again brings back the original.

Leaving ENV on and forgetting (its LED is lit). Huge LFO depth makes sounds seasick: start PMD or AMD around 10โ€“20.

Stuck, or found a better way?
Level 3 cleared. Badge: Shape Shifter.

Open this lesson as its own page (handy for sharing or bookmarking)

4
Level 4

Two sounds, one key

Stack a piano and a pad so every key plays both. This is V16's big trick: 8 "Voices", each with its own sound.

You'll use:

The list closes after about 3 seconds of no turning. Just turn PRESETS again. All 8 Voices share 20 notes in total, so big chords on four layers run out fast.

One key plays two sounds, and you can balance and pan them.

Voice 2 is still Off (K4), or it's on a different MIDI channel from Voice 1, so it doesn't play. Big chords on several layers run out of the 20 notes and cut off.

Stuck, or found a better way?
Level 4 cleared. Badge: Layer Cake.

Open this lesson as its own page (handy for sharing or bookmarking)

5
Level 5

Make it loop

Record a 16-step pattern and jam over it.

You'll use:

Long notes: while recording, hold a key and turn to where it should end, then let go. Ratchets (ร—2, ร—3, ร—4 on one step) give you drum-roll stutters.

Hold PLAY/STOP for Panic. It stops everything and kills stuck notes.

A 16-step loop plays back, you can fix one wrong step, and tempo and swing change it while it plays.

ARP is still on ("Disable ARP to enter"). Not pressing REC again to stop recording. Trying to pick a step while it's playing: step selection only works when stopped or recording.

Stuck, or found a better way?
Level 5 cleared. Badge: Loop Maker.

Open this lesson as its own page (handy for sharing or bookmarking)

6
Level 6

Hook it to FL Studio

Use the FM-1 as a keyboard for FL plugins, or let FL play the FM-1's sounds.

CC1 ยท 2 ยท 4Sound modulation
CC7 / CC11Volume / expression
CC70โ€“73Filter
CC74โ€“77Reverb
CC78โ€“81Delay
CC82โ€“85Distortion
CC86โ€“89Chorus
CC90โ€“93Phaser

Effect CCs only respond on the Effect Ch set in GLO. The old V15 numbers (CC0โ€“23) don't work anymore. Every note uses one fixed velocity, set in GLO as Velocity.

Stuck, or found a better way?
Level 6 cleared. Badge: DAW Buddy.

Open this lesson as its own page (handy for sharing or bookmarking)

7
Level 7

Keep your stuff

Save your sounds and loops so they're there tomorrow.

You'll use:

Effects save with Globe or ALL, not with Preset. "More Unsaved" means something else still has changes.

After switching the FM-1 off and on, your sound, effects and loop are still there.

Saving only Preset after changing effects or Voices (use Globe or ALL). Turning off without saving.

Stuck, or found a better way?
Level 7 cleared. You can now drive the FM-1 for real.

Open this lesson as its own page (handy for sharing or bookmarking)

โ˜พ
Boss level ยท about 30 minutes

The Crypt Dub

Build a slow, spooky goth-dub groove in the spirit of Bauhaus's Bela Lugosi's Dead: a dry "tok" rhythm, a bass line that walks downhill, scratchy noise shards and a cavern of echo.

These are original parts that borrow the moves of that 1979 record (space, repetition, dub echo), not its notes. Once you've built them, try learning the real riffs by ear and swap them in. That's how everyone learns this stuff.

You'll use:

Step 1 Build the crypt (effects)

Effects are shared by every Voice in V16. Set up one dark room and the whole track lives in it.

DelayOn ยท Decay 55% ยท Rate 40% ยท Mix 35%
ReverbHall ยท Decay 75% ยท Mix 30%
FilterLow Pass ยท cutoff about halfway
DistortionOff for now (it hits everything)
Chorus ยท PhaserOff

Shortcut: the Crypt Dub Kit ($5) has ready-made toks, basses, pads and noise shards for every part of this track.

Step 2 The "tok" (Voice 1)

play a noterest (skip)

Step 3 The downhill bass (Voice 2)

press the notekeep holding

That Dโ€“Cโ€“Bโ™ญโ€“A walk is the oldest minor-key move there is. It sounds like slowly sinking into a basement. Bonus: play the last A an octave higher every fourth time.

Step 4 Noise shards (Voice 3, played live)

Step 5 The ghost pad (Voice 4)

Step 6 Arrange the ritual

In V16's arrangement grid, each row is a Voice and each column is a section. Put the patterns in the cells like this (the bottom bar shows which knob picks the pattern for a cell), and set the arrangement length to 6.

Step 7 Dub it live

Dub means the mixing desk is an instrument. Stay on the FX screen while the arrangement plays:

Record it: in FL Studio, arm an audio track with the FM-1 as input (USB Loopback Off in GLO), hit record, and perform the dub moves live. Spoken word over the top, delivered very slowly, is entirely in genre.

Stuck, or found a better way?
Boss defeated. Badge: Undead Undead.

Open this lesson as its own page (handy for sharing or bookmarking)

โ™ซ
Sound packs

New sounds for your FM-1

Themed banks of 32 sounds you load straight into the FM-1 (V16 imports DX7 banks) with the free Sound Loader. Every pack comes with a free lesson on this site.

New ยท $5Crypt Dub KitToks, rim knocks, downhill basses, ghost pads, noise shards and vampire keys. Made for the Crypt Dub boss level.Buy ยท $5 โ†’
New ยท $5FM-808 Drum Kit32 808-style drums: kicks, snares, claps, hats, toms, cowbell and an 808 bass. Use it with the Beat Box and the drum lesson.Buy ยท $5 โ†’
Planned80s SynthpopGlassy keys, punchy basses and shiny bells.
PlannedLo-fi KeysDusty electric pianos, soft plucks and warm pads.
Which pack should come first, or what should be in it?
๐ŸŽง
Gear

Handy extras for the FM-1

Small things that make the FM-1 more fun. Links go to Amazon searches.

๐Ÿ›’ Visit the full FM-1 Store

As an Amazon Associate I earn from qualifying purchases. The price is the same for you.

โœŽ
Community

Community: tips & questions

Found a trick, hit a snag, or want a song turned into a boss level? Tell us. You're the reason this guide exists.

๐Ÿ‘€ Read by a personEvery message, every day.
๐Ÿ’ฌ Every question answeredUsually within a day, right here.
โญ Credit where it's dueTips that make it into a lesson carry your name.

๐Ÿ“š See every answered question in the tips library โ†’

Replies and featured tips usually go up within a day. The name you choose is how we'll thank you. Please don't include personal details like your email or address.

?
Rescue

When it acts weird

Notes won't stop

Hold PLAY/STOP (Panic). In FL Studio, make sure only the FM-1 input is enabled.

"Disable SEQ to enter" / "Disable ARP to enter"

ARP and SEQ can't both be on. Switch off whichever one is lit.

My effects didn't change with the preset

On purpose in V16: effects are shared. Change them on the FX screen with ALGORITHM.

My layer disappeared after switching off

Voice settings are saved with SAVE โ†’ Globe or ALL.

Keyboard is way too high or low

Press OCTโˆ’ and OCT+ together.

A setting isn't where this guide says

V16 reshuffled GLO into five pages (Voices 1โ€“4, Voices 5โ€“8, performance and connection, display, data). Flip through all five with SELECT. The last one shows the firmware version.

No sound in my headphones (or the speaker won't turn off)

Use headphones with a standard 3.5mm stereo (TRS) plug. Some phone headsets with a microphone ring (TRRS) don't sit right in the jack. Also check MASTER volume and that the Voice you're playing is On.

My computer doesn't see the FM-1

Most often it's a charge-only USB cable: try another cable that you know carries data, plugged straight into the computer (no hub). Close other music apps that might be holding it, then unplug and replug.

Every note plays twice in FL Studio

Only enable the FM-1 itself in FL Studio's MIDI input list. "Midi Through" and other virtual ports loop notes back. See the FL Studio lesson.

All my Voices play at once from the DAW

The Voices are set to the same MIDI channel, or to ALL. Give each Voice its own channel (PRESETS โ†’ Voice โ†’ K1). See the MIDI reference.

Every note is the same loudness

The FM-1's keys aren't velocity sensitive: they send the fixed Velocity set in GLO. Use Voice Level, CC11 expression from a DAW, or a velocity-sensitive keyboard for dynamics.

My old effect knobs/CCs don't work anymore

V16 moved effect CCs to 70โ€“93 and they only respond on the Effect channel. Old CC0โ€“23 mappings need updating. MIDI reference โ†’

The sequencer won't follow my DAW's tempo

Turn on Sync on the SEQ (or ARP) pages, and make sure your DAW sends MIDI clock to the FM-1's port.

Bluetooth MIDI won't connect

Long-press HOME to switch Bluetooth on: the HOME LED blinks while waiting and stays solid once connected. Pair from your app's MIDI/Bluetooth settings rather than the phone's main Bluetooth menu.

I loaded a sound pack and now want my old sounds back

If you exported the bank first, load that .syx back the same way. How to load and back up banks โ†’

Open this lesson as its own page (handy for sharing or bookmarking)

โ–ถ
Watch

Videos that actually teach

Unofficial fan guide, not affiliated with or endorsed by M-VAVE. Built from M-VAVE's FM-1 manual and the official V16 release notes (2026-10-20). Where they disagree, this follows V16. Progress is remembered in this browser only.
Level cleared! ๐ŸŽ‰
What tripped you up, or what trick did you find? Other players would love to know.